Most beef comes from steers (young castrated males) that are about 18 months old. The toughest cuts come from the lower legs (shin), shoulders, flanks, neck and tail. The tenderest cuts come from the hindquarter and from the ribs and sirloin.

1. Neck or Clod
Comes mainly from around the neck and shoulder , nowadays probably labelled ‘stewing steak. It can be used for mince that is going to be slow cooked such as in Spaghetti Bologenese or something similar.

2. Back Ribs
There is less meat in the back ribs than in the fore ribs and it is tougher. A good quality animal can produce a good roasting joint particularly if the meat is well hung.

3. Fore ribs
These are the source of lean meat and a single rib makes a good portion for two people. A larger piece from an animal that has been well hung makes an excellent and traditional roasting joint. It should be cooked on the bone. Boned rib roast may be known as rib eye, and rib steaks are also known as rib eye steaks, or as entrecote (from the French ‘between the ribs’) steaks

4. Chuck steak
This is the meat taken from around the shoulder blade. It is often sold cubed, for stews and casseroles. Larger pieces of chuck steak may be used for daubes and stews. Or it can be minced and used as for neck.

5. Sirloin
The loin, stretching from the ribs almost to the end of back produces many tender cuts. Underneath it lies the tenderloin or fillet. It starts at the wing rib running backwards through the fillet and ending in the sirloin. In Britain, the whole loin section is called sirloin and is most commonly divided into roasts; the best sirloin roasts include part of the tenderloin. The tenderloin can be roasted whole or cut into tournedos and smaller filet mignon steaks. From the centre of the tenderloin comes the Chateaubriand, a small roast that serves two people. You will have heard of filet en croute, or beef Wellington, in which this joint is wrapped in puff pastry with pâté, foie gras, or duxelles.

Thus the sirloin includes:

5a. Wing Rib
This joint comprises the last three ribs at the front of the sirloin, i.e. those that in man would be the lowest three ribs

5b. Sirloin Joint
This is a joint from the hindquarter end of the sirloin (a T bone steak as would be cut from this area). The advantage of this cut is that it retains and absorbs flavour from the bone.
A 'chop' cut from the wing rib end of the sirloin or the tail end of the fore ribs, is traditionally known as a porterhouse steak.

5c. Sirloin Steak
This is the eye of the sirloin which is both little and a probably tastier than the fillet, it is almost as tender, and should be roasted fast and served pink.

5d. T Bone Steak
This is a cross-section of the unfilleted sirloin.

5e. Fillet(undercut)
There is very little fillet in one animal that is why it is expensive. Fillet should be very tender, especially from a well-hung carcass. It can have less flavour than other cuts and suffers badly if overcooked. Frying, grilling and quick roasting (of a whole or large piece) are all appropriate cooking methods.

5f. Fillet Steak
Steaks cut from the fillet, which also produces fillets mignon from its narrower end and Chateaubriand, a larger joint from the thicker centre of the fillet.

6. Rump Steak
Is considerably cheaper than fillet steak and also tastier and chewier but can sometimes be not very tasty and too tough. It is suitable for frying, grilling and barbecuing, in thickish slices. A really good quality piece of rump can be roasted quickly and served rare. The meat from the lower muscle of the rump is rather tougher. Good, well-hung rump steak makes the best steak tartare.

7. Topside, Silverside and Top Rump
7a. Topside
This is the long, inner muscle of the cow's thigh. It is a little more tender than silverside, and can be used for roasting but should be cooked slowly. It responds well to braising and is tasty as a cold joint. Thickly sliced and cut into strips, topside is perfect for quick marinating and flash frying.

7b. Silverside
Cut from the back of the thigh, it is tougher than topside. It is best used for pot roasts or stews and responds well to marinating.

7c. Top Rump / Thick Flank
This cut from just above the leg produces a tough joint but it can be used for marinating and flash frying or stir frying, or minced for burgers and slow cooked daubes and casseroles. It is also used to make salt beef

8. Oxtail
usually divided into short lengths by cutting between the tail vertebrae. Long slow cooking produces tasty meat which falls off the bone and is accompanied by unctuous gravy.

9. Leg
This is from the top of the back leg. It is tough and lean requiring long slow cooking. The leg is also known as the hock. Leg meat is at its best when braised, pot roasted, or stewed slowly with plenty of flavourings to make a rich sauce. Alternatively, the meat may be sliced thinly, stuffed and braised as beef rolls, or used for minced beef.

10. Hind Shin
The classic marrowbone is the whole shinbone that is usually used for making beef stock and consommé. After simmering for an hour or so the marrow can be scraped out and eaten on toast.

11. Hindquarter flank
This is the below the sirloin and behind the ribs. It is has no bones, it is cheap, fatty, but delicious if cooked slowly. It is also used for salting.

12. Skirt
The term skirt refers to a group of several muscles from the inside of the animal. The biggest piece of skirt, sometimes called goose skirt, comes from the inside of the flank. Another piece comes from just under the skin of the inner thigh. It is tough, but lean and tasty, and so generally requires long, slow cooking. One of its classic uses is in steak and kidney pies and puddings. If you trim and mince it finely it can be used to make burgers, it is also used for Pastrami and corned beef.

13. Forequarter Flank / Short Ribs
This is similar to the hindquarter flank except that it has ribs in it. The ‘short ribs’ are the rack of ribs taken from this area.

14. Shin
The top of the foreleg of an animal, this is a bargain cut and needs to be cooked very slowly, perhaps in wine. On the bone, it can be braised, off the bone it makes excellent stew. This can be mixed with leg of beef for stewing. Be careful of ‘stewing steak’ when you do not know the mixture of meat that has gone into it as not all cuts take the same length of time to cook – this could be a problem with ‘pre-packaged’ stewing steak which could be made up of assorted cuts that were approaching there ‘best before ‘ dates.

The part of the shin of beef near the feet contains the toughest meat in the animal (as does hind shin), though they are lean with plenty of taste. The fore shin is more fleshy than the hind shin.

15. Brisket
A cut from further up the ribcage, it may or may not have the breastbone still attached, it is marginally leaner than flank but still pretty fatty. It is the used for salting. It can be good boiled, is a useful inexpensive cut for simple dishes such as pot-au-feu. The section nearer the skirt is more meaty and can be braised or pot roasted. It requires slow, moist cooking. It is often salted or cured for corned beef

16. Leg Top
Meat from here is too tough for fast cooking and is usually sold as 'braising' steak.